Introduction

This is a step-by-step guide to remove the outer case on the AirPort Extreme Model A1034.

Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.
  • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.
  • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing. Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.
  • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

Unplug the black connector on the top of the metal casing by gently pulling horizontally.
  • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Travis Go

Member since: 10/12/2011

158 Reputation

2 Guides authored

Team

Cal Poly, Team 17-15, Regan Fall 2011 Member of Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 Members

7 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 3

All Time: 2,474