Introduction

This guide will allow you to access the inside parts of this device

  1. With a J00 Philips head screwdriver, unscrew the two 4mm black screws  located at the bottom of the device.
    • With a J00 Philips head screwdriver, unscrew the two 4mm black screws located at the bottom of the device.

    • Before disassembling your device, be sure it is powered off.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Using a plastic opening tool, begin softly prying open device by first inserting it in between the front and back panels. Continue prying the edges while moving around the device's perimeter until the back can be easily removed.
    • Using a plastic opening tool, begin softly prying open device by first inserting it in between the front and back panels.

    • Continue prying the edges while moving around the device's perimeter until the back can be easily removed.

  4. Carefully lift back panel away from the body of the device.
    • Carefully lift back panel away from the body of the device.

    • Speaker wires are connected to both the front and back panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 386