This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Dexter Corded Jigsaw 750W Charcoal Replacement
Céline Chemineau and one other contributor
Last updated on Sep 2, 2026
Views: 1.3K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 13
- Past 30 Days:
- 77
- All Time:
- 1,322
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This guide shows you how to change one carbon brush on your Dexter 750W corded jigsaw; to change the second, you just have to follow the same method.
What you need
-
-
-
Using a screwdriver unscrew and open the unit.
-
Unlock the tray by lifting the lever.
-
-
-
Press lightly on the paw with a point to make it come out.
-
Remove the coal by pressing on it.
-
-
-
Lift the small tab from the inside by pressing on it, it should stick out slightly.
-
-
-
Put the new coal in the coal holder.
-
Pull on the charcoal to make it stick out.
-
-
-
-
Compress the carbon holder and put it back in its housing.
-
The coal holder must be in the right direction, the small line is at the end.
-
Ask FixBot
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
