Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement - iFixit Repair Guide

Introduction

This guide will show you how to replace the motor in your device

What you need

Step 1 Unplug

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement, Unplug: step 1, image 1 of 1

Before you begin, remember to disconnect the mains plug.

Step 2

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 2, image 1 of 2

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 2, image 2 of 2

Remove the side handle and the protective cover.

Step 3

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 3, image 1 of 2

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 3, image 2 of 2

Unscrew the 4 screws to open the machine.

Step 4

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 4, image 1 of 1

Remove the paddle switch for better access.

Step 5

Remove the two pods.

Step 6

Relax the blade springs.

Step 7

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 7, image 1 of 1

Relax the carbons.

Step 8

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 8, image 1 of 1

Unscrew the four head screws and remove the motor.

Step 9

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 9, image 1 of 1

Put the new motor back.

Step 10

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 10, image 1 of 1

Re-grease and replace gear case.

Step 11

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 11, image 1 of 2

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 11, image 2 of 2

Replace the carbons.

Step 12

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 12, image 1 of 3

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 12, image 2 of 3

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 12, image 3 of 3

Then reconnect the carbons.

Step 13

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 13, image 1 of 1

Replace the paddle switch.

Step 14

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 14, image 1 of 1

Tighten the 4 screws to close.

Step 15

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 15, image 1 of 2

Dexter 800W Corded Angle Grinder - 800AG2-125.5 Motor Replacement: step 15, image 2 of 2

Replace the outer flange, protective cover and side handle.

Conclusion

By the end of the guide you will have replaced the motor in your device.

To reassemble perform the steps in reverse.

Special thanks to these translators:

fr en

100%

HelloMacOS

HelloMacOS is helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

Céline Chemineau

Member since: 01/29/20

16,581 Reputation

95 Guides authored

Team

Leroy Merlin Member of Leroy Merlin

Community

36 Members

239 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 4

Past 7 Days: 9

Past 30 Days: 17

All Time: 563