Fix Your Stuff Community Store

Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement

Introduction

This tutorial shows you the change of a single carbon, to change the second you just have to follow the same method.

What you need

  1. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement, Unplug: step 1, image 1 of 1

    • Before starting, remember to disconnect the outlet from the mains.

    Translate

  2. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 2, image 1 of 2 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 2, image 2 of 2

    • Remove the dust case and the seal on the back of the device.

    Translate

  3. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 3, image 1 of 3 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 3, image 2 of 3 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 3, image 3 of 3

    • Unscrew the six screws from the pad.

    • Lock the motor with a screwdriver to be able to unscrew the centre screw, you will not be able to get there without blocking the gear.

    Translate

  4. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 4, image 1 of 2 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 4, image 2 of 2

    • Using a screwdriver or screwdriver, unscrew and open the device.

    Translate

    • Lift the two coals with a screwdriver to get them out of their homes.

    Translate

    • Press the tab to disconnect the carbon from the engine

    Translate

  8. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 7, image 1 of 3 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 7, image 2 of 3 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 7, image 3 of 3

    • Remove the coals from the coal door.

    • Then put the new ones inside.

    Translate

  9. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 8, image 1 of 1

    • Using a screwdriver, lift the connecter tab before reconnecting it.

    Translate

    • Reconnect the carbon and check that they hold well.

    Translate

  11. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 10, image 1 of 1

    • Put the two coals back in their homes.

    Translate

  12. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 11, image 1 of 3 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 11, image 2 of 3 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 11, image 3 of 3

    • Replace the shell, then screw it back on.

    • Remember to put the joint back in its place.

    Translate

  13. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 12, image 1 of 2 Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 12, image 2 of 2

    • Reposition the part, then lock the engine with a screwdriver to screw.

    • Put the tray back on and screw the screws.

    Translate

  14. Dexter 330W Wired Vibrating Sander - 330SHS2.5 Carbon Replacement: step 13, image 1 of 1

    • Finally, reposition the vacuum bag.

    Translate
Finish Line

Special thanks to these translators:

fr en

100%

HelloMacOS

HelloMacOS is helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

Céline Chemineau

Member since: 01/29/20

16,581 Reputation

95 Guides authored

Badges: 12

+9 more badges

Team

Leroy Merlin Member of Leroy Merlin

Community

36 Members

239 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 268