Fix Your Stuff Community Store

Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement

Introduction

This tutorial shows you the change of only one carbon, to change the second you just have to follow the same method.

What you need

  1. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement, Unplug: step 1, image 1 of 1

    • Before you begin, remember to disconnect the mains plug.

    Translate

  2. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 2, image 1 of 2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 2, image 2 of 2

    • Remove the three screws from the pad.

    Translate

  3. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 3, image 1 of 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 3, image 2 of 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 3, image 3 of 3

    • Be careful to keep the three small marbles.

    Translate

  4. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 4, image 1 of 2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 4, image 2 of 2

    • Unscrew the screws to open the shell.

    Translate

  5. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 5, image 1 of 1

    • Remove the orange cap.

    Translate

    • Using a screwdriver lift the brushes.

    Translate

  8. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 7, image 1 of 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 7, image 2 of 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 7, image 3 of 3

    • Remove the carbon from its housing then take it out.

    • Using pliers, fold down the small tab.

    Translate

  9. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 8, image 1 of 1

    • Replace the new carbon in its carbon holder.

    Translate

    • Reconnect the carbon, test if the carbon slides well inside.

    Translate

  11. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 10, image 1 of 1

    • Replace the coals in their housing.

    Translate

  12. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 11, image 1 of 1

    • Before closing, check that no cable is blocked and that each part is in its place.

    • Replace the screws on the hull.

    Translate

  13. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 12, image 1 of 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 12, image 2 of 3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 12, image 3 of 3

    • Replace the retaining flange, be careful to have the three small balls.

    Translate

  14. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 13, image 1 of 2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: step 13, image 2 of 2

    • Tighten the three screws of the retaining plate then that of the pad.

    Translate
Conclusion

To reassemble follow guide through or in reverse

Special thanks to these translators:

fr en

100%

HelloMacOS

HelloMacOS is helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

Céline Chemineau

Member since: 01/29/20

16,581 Reputation

95 Guides authored

Badges: 12

+9 more badges

Team

Leroy Merlin Member of Leroy Merlin

Community

36 Members

239 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 6

All Time: 163