Fix Your Stuff Community Store

Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement

Introduction

This guide will take you through the steps of replacing the LED in your device.

What you need

  1. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement, Unplug: step 1, image 1 of 1

    • Before you begin, remember to disconnect the mains plug.

    Translate

  2. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 2, image 1 of 1

    • Remove the seal on the back of the device.

    Translate

  3. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 3, image 1 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 3, image 2 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 3, image 3 of 3

    • Unscrew the first screw of the pad.

    • Then unscrew the four remaining screws and pull up to remove it.

    • Finally remove the screws located on the hull of the device.

    Translate

    • This step is the same for both carbons.

    • Wedge the two carbons to be able to take out the rotor. Reassemble them with a screwdriver, then with another screwdriver press the tab.

    • Lift the carbon and with the other tip of the screwdriver, twist the small leg.

    • Then remove the carbon.

    Translate

    • Remove the rotor by lifting the frame to be able to retrieve it more easily.

    Translate

  7. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 6, image 1 of 1

    • Pull out the switch for more space.

    Translate

    • Remove the LED from its housing using pliers

    Translate

  9. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 8, image 1 of 2 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 8, image 2 of 2

    • Desolder the two black and red wires to be able to change the part.

    Translate

  10. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 9, image 1 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 9, image 2 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 9, image 3 of 3

    • Resolder the new LED.

    • Then replace the LED in its housing, taking care to put the cables back in their path.

    Translate

  11. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 10, image 1 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 10, image 2 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 10, image 3 of 3

    • Replace the switch, the rotor in its housing. and unlock the carbons.

    Translate

  12. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 11, image 1 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 11, image 2 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 11, image 3 of 3

    • Replace the cable, the sheath must arrive between the two studs and the sleeve must be positioned in its housing.

    • Replace the shell of the sander, taking care to position the stabilizers correctly in their housings.

    • Finally remove the screws located on the hull of the device.

    Translate

  13. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 12, image 1 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 12, image 2 of 3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: step 12, image 3 of 3

    • Replace the pad by positioning it perfectly in the tips.

    • Tighten the four screws.

    • Then the last screw. Finally put the gasket back in place.

    Translate
Conclusion

By the end of the guide you will have successfully replaced the LED.

To reassemble preform the steps in reverse.

Special thanks to these translators:

fr en

100%

HelloMacOS

HelloMacOS is helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

Céline Chemineau

Member since: 01/29/20

16,581 Reputation

95 Guides authored

Badges: 12

+9 more badges

Team

Leroy Merlin Member of Leroy Merlin

Community

36 Members

239 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 164