This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Introduction
I purchased this 1999 SHARP MD-SS321 along with its remote for 3.2 USD and 1 USD respectively as junk. When I tested it with a 5V AC adapter I had at home, the basic functions such as play, stop, and MD ejection were perfect with no skipping, which is in excellent condition considering its age and price. However, the built-in HOLD switch on the main unit slides poorly and has poor responsiveness. Therefore, I will perform an internal cleaning after disassembling the movable parts of the HOLD switch. By the way, although the remote was able to power on and perform play and stop functions, the volume would change when I operated the track, and conversely, the track would switch when I adjusted the volume. It is a mess. I assume this is due to the degradation of the resistance on the internal board, but I will not address that this time.
To reassemble your device, follow these steps in reverse order.
0 Guide Comments