Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

If your computer were to experience any unexpected crashes or viruses follow this guide to remove and replace the hard drive.

  1. Flip the laptop on its back, so that the underside is facing up.
    • Flip the laptop on its back, so that the underside is facing up.

  2. Push and hold the slide button to the left and unlock the mechanism.
    • Push and hold the slide button to the left and unlock the mechanism.

  3. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  4. Lift the computer up and slowly pull the battery straight out from the device. Lift the computer up and slowly pull the battery straight out from the device.
    • Lift the computer up and slowly pull the battery straight out from the device.

  5. Flip the laptop on its back, so that the underside is facing up
    • Flip the laptop on its back, so that the underside is facing up

  6. Remove the four 3.0mm Phillips #1 screws securing the hard drive casing.
    • Remove the four 3.0mm Phillips #1 screws securing the hard drive casing.

  7. Slide the hard drive away from the computer, slowly and carefully. Slide the hard drive away from the computer, slowly and carefully. Slide the hard drive away from the computer, slowly and carefully.
    • Slide the hard drive away from the computer, slowly and carefully.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kai Kapossy

Member since: 03/24/2019

628 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 16

All Time: 209