Introduction
In this guide, we will show you how to remove and replace the Memory Module.
What you need
-
-
Slide both battery latches to the open position.
-
Slide the battery out of the battery bay.
-
-
-
-
Loosen the eight screws that secure the memory cover.
-
Remove the memory cover and set it aside.
-
-
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.
-
Remove the memory module from the connector.
-
Almost done!
Finish Line
Cancel: I did not complete this guide.
One other person completed this guide.
Team
