Introduction

This guide will show you how to replace your computers RAM. The RAM is the computers random-access memory which allows for data to be stored and read. This guide goes through the steps to remove the components to access the RAM for times when it needs to be removed and replaced.

Tools

No tools required.

Parts

No parts required.

Make certain the power is off.
  • Make certain the power is off.

Add Comment

Press and slide the buttons inward.
  • Press and slide the buttons inward.

Add Comment

Slide the battery away from the  computer.
  • Slide the battery away from the computer.

Add Comment

Remove the Battery from the slot.
  • Remove the Battery from the slot.

Add Comment

Unscrew the Phillips head screw on the back of the computer.
  • Unscrew the Phillips head screw on the back of the computer.

Add Comment

Lift off the panel the screws were holding.
  • Lift off the panel the screws were holding.

Add Comment

Push the two tabs at the sides of the ram towards the sides of the computer. Push the two tabs at the sides of the ram towards the sides of the computer.
  • Push the two tabs at the sides of the ram towards the sides of the computer.

Add Comment

Remove the RAM.
  • Remove the RAM.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Nathaniel Joyal

Member since: 10/18/2016

318 Reputation

2 Guides authored

Team

UMass Dartmouth, Team 1-3, Catania Fall 2016 Member of UMass Dartmouth, Team 1-3, Catania Fall 2016

UMASSD-CATANIA-F16S1G3

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 82