Introduction

Steps on how to take out and replace the RAM drive. Follow these steps for the easiest possible way to take out and replace the RAM drive.

Parts

No parts required.

Be sure the power is off and all cables are unplugged from the device before starting.
  • Be sure the power is off and all cables are unplugged from the device before starting.

  • After flipping over the laptop, the battery is on the bottom side of the laptop.

  • Find the tabs on both the left and right side of the battery.

Add Comment

Push tabs toward the outside of the laptop until they lock in place.
  • Push tabs toward the outside of the laptop until they lock in place.

Add Comment

Deck the Halls
With tools and Fix Kits
Push the battery forward to eject it from the laptop. Push the battery forward to eject it from the laptop.
  • Push the battery forward to eject it from the laptop.

Add Comment

Make sure the laptop is turned off and all cables are unplugged. Loosen the three 3 mm screws on the RAM cover.
  • Make sure the laptop is turned off and all cables are unplugged.

  • Loosen the three 3 mm screws on the RAM cover.

  • Screws will not completely come out.

  • Lift the cover and remove it from the laptop.

Add Comment

Pull tabs apart on both the top and bottom of the memory card. Lift memory card and remove it from the laptop.
  • Pull tabs apart on both the top and bottom of the memory card.

  • Lift memory card and remove it from the laptop.

  • Repeat the process for the second memory card.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Hogg

Member since: 03/20/2017

604 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 76