What you need
-
-
Slide the battery release latch until it clicks into place.
-
Slide the battery out of the battery bay.
-
-
-
-
Remove the six screws that secure the base cover to the computer base.
-
Lift the base cover off the computer at an angle as shown in the following illustration.
-
-
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
-
Remove the memory module from the memory module connector.
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Team
