Dell Studio 1735 Memory Module Replacement
Last updated on May 24, 2018
Views: 384
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 5
- Past 30 Days:
- 41
- All Time:
- 384
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
Tools
-
-
-
Slide and click the battery latch release.
-
Slide the battery out of the battery bay.
Ask FixBot
-
-
-
-
-
-
Loosen the eight captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
-
-
-
-
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
-
Remove the module from the connector.
-
-
To reassemble your device, follow these instructions in reverse order.
