Parts

No parts required.

Ensure the laptop is turned off and unplugged before attempting to remove any piece. Place the laptop lid down so the underside is visible.
  • Ensure the laptop is turned off and unplugged before attempting to remove any piece.

  • Place the laptop lid down so the underside is visible.

  • Pull battery release switch and gently pull the battery directly away from the switch.

Add Comment

Identify the back cover of the laptop.
  • Identify the back cover of the laptop.

Add Comment

Unscrew and remove all of the 6.0mm screws with a Phillips #1 screwdriver.
  • Unscrew and remove all of the 6.0mm screws with a Phillips #1 screwdriver.

Add Comment

Deck the Halls
With tools and Fix Kits
Lift the back cover off of the laptop.
  • Lift the back cover off of the laptop.

Add Comment

Unscrew all of the 6.0 mm screws with a Phillips #1 screwdriver holding the hard drive cage on the computer. Unscrew all of the 6.0 mm screws with a Phillips #1 screwdriver holding the hard drive cage on the computer.
  • Unscrew all of the 6.0 mm screws with a Phillips #1 screwdriver holding the hard drive cage on the computer.

Add Comment

Lift the hard drive cage out of the laptop. Lift the hard drive cage out of the laptop.
  • Lift the hard drive cage out of the laptop.

Add Comment

Pull tab to unplug the drive from the computer Pull the hard drive out of the hard drive tray. Pull the hard drive out of the hard drive tray.
  • Pull tab to unplug the drive from the computer

  • Pull the hard drive out of the hard drive tray.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Zach Dylag

Member since: 03/24/2015

563 Reputation

4 Guides authored

Team

Baylor, Team 6-2, Shaver Spring 2015 Member of Baylor, Team 6-2, Shaver Spring 2015

BU-SHAVER-S15S6G2

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 32

All Time: 1,098