Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
Tools
-
-
-
Slide the battery release latch until it clicks into place.
-
Turn the computer top side up, open the display, and press the power button to ground the system board.
-
-
-
-
-
Turn the computer top side up, open the display, and press the power button to ground the system board.
-
-
-
-
-
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
-
Remove the module from the connector.
-
-
To reassemble your device, follow these instructions in reverse order.