Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

These are the steps to remove the battery from the Precision Dell 5510.

  1. Open the system badge flap over to reveal the screws underneath (marked 1 on the image).
    • Open the system badge flap over to reveal the screws underneath (marked 1 on the image).

    • Remove the 12 screws that secure the base cover to the computer.

  2. Pry the edges base cover and lift it to remove it from computer.
    • Pry the edges base cover and lift it to remove it from computer.

  3. Unplug the connection that links the battery to the computer. Unplug the connection that links the battery to the computer.
    • Unplug the connection that links the battery to the computer.

  4. Remove the four 4.0 mm JIS #0 screws surrounding the battery. Remove the four 4.0 mm JIS #0 screws surrounding the battery.
    • Remove the four 4.0 mm JIS #0 screws surrounding the battery.

  5. Carefully remove the battery from the computer. Carefully remove the battery from the computer.
    • Carefully remove the battery from the computer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Atlanta Phelps

Member since: 08/28/2018

313 Reputation

3 Guides authored

Team

IUPUI, Team S1-G5, Arle Fall 2018 Member of IUPUI, Team S1-G5, Arle Fall 2018

IUPUI-ARLE-F18S1G5

3 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 30

Past 30 Days: 115

All Time: 2,599