Introduction

Replacing Hard Drive on the GX100 is very easy. Consider, maybe the fact that dell Tried to make it possible to take apart most of the machine not using any screws.

  1. pull cover UP while holding in the 2 buttons on either side of the optiplex.
    • pull cover UP while holding in the 2 buttons on either side of the optiplex.

  2. Pull Ribbon Cable Straight Back, and Out of Cd drive Using the Plastic Tab.
    • Pull Ribbon Cable Straight Back, and Out of Cd drive Using the Plastic Tab.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Pull Power Cable Out of Cd drive.
    • Pull Power Cable Out of Cd drive.

    • All Cables Will Take A Bit Of Wiggling to Come Out.

  5. Remove power cable from floppy drive.
    • Remove power cable from floppy drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

hans

Member since: 07/13/2010

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 515