Skip to main content
    • Shut down your computer. Disconnect all power sources before opening the computer cover or panels.

    • Remove the battery and base cover from the computer.

  1. Pry the securing clips away from the memory module until it pops up.
    • Pry the securing clips away from the memory module until it pops up.

  2. Remove the memory module from its connector on the system board by drawing the module from the system board at 45-degree angle.
    • Remove the memory module from its connector on the system board by drawing the module from the system board at 45-degree angle.

    • Repeat steps 1 and 2 to add the second memory chip (module).

    • Install battery and base cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Hezekiah Brown

Member since: 02/11/2021

6,012 Reputation

50 Guides authored

Team

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

38 Members

1,949 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 41