Introduction
This guide walks through the removal of the Mini Card Door for access to the Mini Card itself, and for removal of further parts in the device.
What you need
-
-
Remove the single Phillips #1 screw.
-
Lift up and remove with your fingernail, or a spudger, from the side of the door with the screw.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team S1-G5, Thompson Spring 2018 Member of University of North Texas, Team S1-G5, Thompson Spring 2018
UNT-THOMPSON-S18S1G5
4 Members
8 Guides authored
