Introduction

This guide will be helpful to you if you are looking for information on how to remove the back panel. It is essential for accessing the laptop components located on the back side of the main board (ie. RAM and hard drive). Follow the steps in order for successful results.

Parts

No parts required.

Use PH0 screwdriver to unscrew the 4.49x7.88 mm screw in the middle of the back panel.
  • Use PH0 screwdriver to unscrew the 4.49x7.88 mm screw in the middle of the back panel.

Add Comment

Place thumbs flat on the front side of the back panel (the side to open the laptop). Push panel upwards sliding it out of the locked position. Lift panel out of socket.
  • Place thumbs flat on the front side of the back panel (the side to open the laptop).

  • Push panel upwards sliding it out of the locked position.

  • Lift panel out of socket.

Add Comment

Remove panel and screw from the device. This opens up the main board of the device.
  • Remove panel and screw from the device. This opens up the main board of the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

John Shellenberger

Member since: 03/23/2015

367 Reputation

3 Guides authored

Team

Baylor, Team 5-6, Williams Spring 2015 Member of Baylor, Team 5-6, Williams Spring 2015

BU-WILLIAMS-S15S5G6

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 20

All Time: 741