Parts

No parts required.

This is the guide to replace the led control board in your DEEL Laditude CPX you can get all the tools for this guide from a iPhone disassembley kit they are for sale and for this guide the part you will need is a new led control board for your dell laditude CPX
  • This is the guide to replace the led control board in your DEEL Laditude CPX you can get all the tools for this guide from a iPhone disassembley kit they are for sale and for this guide the part you will need is a new led control board for your dell laditude CPX

Add Comment

Push the triangle things and hold them there with one hand and take the battery out and do the same to the cd drive you can get all the tools for this guide from a iPhone disassembley kit
  • Push the triangle things and hold them there with one hand and take the battery out and do the same to the cd drive you can get all the tools for this guide from a iPhone disassembley kit

Add Comment

Use the green tool to remove the ram compartment cover then remove the ram.
  • Use the green tool to remove the ram compartment cover then remove the ram.

Add Comment

unscrew all screws be shure to keep track of them they are different sizes
  • unscrew all screws be shure to keep track of them they are different sizes

Add Comment

Disconnect the cables and pull out the top base orange connector and the keyboard blue connector then you can remove both the keyboard and the top base Disconnect the cables and pull out the top base orange connector and the keyboard blue connector then you can remove both the keyboard and the top base
  • Disconnect the cables and pull out the top base orange connector and the keyboard blue connector then you can remove both the keyboard and the top base

Add Comment

Remove the screw holding the led control board in and pull out the board be careful not to break the connector off the motherboard Remove the screw holding the led control board in and pull out the board be careful not to break the connector off the motherboard Remove the screw holding the led control board in and pull out the board be careful not to break the connector off the motherboard
  • Remove the screw holding the led control board in and pull out the board be careful not to break the connector off the motherboard

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Logan

Member since: 09/11/2016

201 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 23