Introduction

This guide will take you through how to remove the keyboard for cleaning or replacing.

Image 1/1: Slide the release latches out toward the edges to unlock the battery.
  • To prevent injury and loss of data, ensure the device is turned off.

  • Slide the release latches out toward the edges to unlock the battery.

Add Comment

Image 1/1:
  • Remove the battery by pulling it up and out.

Add Comment

Image 1/1:
  • Remove the three 8mm Philips 0 screws securing the keyboard.

Add Comment

Image 1/1: Gently pry open the keyboard with the plastic opening tool, working under the edges to release the clips.
  • Turn over the device and open the display.

  • Gently pry open the keyboard with the plastic opening tool, working under the edges to release the clips.

Add Comment

Image 1/2: Image 2/2:
  • Lift the keyboard off of the support bracket carefully since it is still connected by a ribbon cable.

Add Comment

Image 1/2: Gently disconnect the ribbon cable by pulling on the clear tab. Image 2/2: Remove the keyboard.
  • Push the clips out on either side of the ribbon cable to release it.

  • Gently disconnect the ribbon cable by pulling on the clear tab.

  • Remove the keyboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Danielle Jarecki

Member since: 10/21/2016

201 Reputation

5 Guides authored

Team

UW Tacoma, Team 1-4, Rose Fall 2016 Member of UW Tacoma, Team 1-4, Rose Fall 2016

UWT-ROSE-F16S1G4

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 89