Introduction

This guide requires a Phillips #00 screwdriver

Parts

No parts required.

  1. Unplug the laptop from the power adapter and turn the power off.
    • Unplug the laptop from the power adapter and turn the power off.

    • Failure to unplug laptop before proceeding could result in risk of electric shock!

  2. Slide the battery-lock tab and hold.
    • Slide the battery-lock tab and hold.

    • Flip the battery away from the chassis to remove it.

    • Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel.

    • These screws will remain in the panel

    • Lift up on the side of the fan nearest the screws to release the fan module

Conclusion

To reassemble your device, follow these instructions in reverse order.

charlierefvem

Member since: 01/11/2011

854 Reputation

7 Guides authored

Team

Cal Poly, Team 13-2, Forte Winter 2011 Member of Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Members

8 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,858