Introduction

This guide requires a Phillips #00 screwdriver

Parts

No parts required.

Unplug the laptop from the power adapter and turn the power off. Failure to unplug laptop before proceeding could result in risk of electric shock! Failure to unplug laptop before proceeding could result in risk of electric shock!
  • Unplug the laptop from the power adapter and turn the power off.

  • Failure to unplug laptop before proceeding could result in risk of electric shock!

Add Comment

Slide the battery-lock tab and hold. Flip the battery away from the chassis to remove it. Flip the battery away from the chassis to remove it.
  • Slide the battery-lock tab and hold.

  • Flip the battery away from the chassis to remove it.

Add Comment

Undo the two screws on the fan cover labeled "F2" These screws will remain in the panel
  • Undo the two screws on the fan cover labeled "F2"

  • These screws will remain in the panel

  • Remove cover plate.

Add Comment

Remove the single 6mm screw holding the fan in place.
  • Remove the single 6mm screw holding the fan in place.

Add Comment

Flip the handle up. Use the handle to pull the fan away directly up, away from case.
  • Flip the handle up.

  • Use the handle to pull the fan away directly up, away from case.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

charlierefvem

Member since: 01/11/2011

854 Reputation

7 Guides authored

Team

Cal Poly, Team 13-2, Forte Winter 2011 Member of Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 2,051