Introduction

Dell Inspiron Mini 1012 key board removing and replace the keyboard .

Image 1/3: Image 2/3: Image 3/3:
  • Turn over laptop .Remove battery from laptop by pushing the two tabs are highlighted in blue. Place the battery off to the side.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the 3 screws highlighted in red that secure the keyboard to the case using the screwdriver with largest phillips head in the box. Make

Add Comment

Image 1/3: Remove the keyboard away from the case ,using a plastic spudger if necessary. Image 2/3: The keyboard will still be attached to the motherboard by a ribbon cable. Image 3/3: The keyboard will still be attached to the motherboard by a ribbon cable.
  • Turn the device right side up and open the device to view the keyboard.

  • Remove the keyboard away from the case ,using a plastic spudger if necessary.

  • The keyboard will still be attached to the motherboard by a ribbon cable.

Add Comment

Image 1/3: The keyboard will have to be attached to the motherboard by a ribbon cable. Image 2/3: Snapped the keyboard back in place. Image 3/3: Snapped the keyboard back in place.
  • Replace the new keyboard with plastic spudger.

  • The keyboard will have to be attached to the motherboard by a ribbon cable.

  • Snapped the keyboard back in place.

Add Comment

Image 1/3: Put the screws back in laptop Image 2/3: Put the screws back in laptop Image 3/3: Put the screws back in laptop
  • Flip over the laptop

  • Put the screws back in laptop

Add Comment

Image 1/2: Image 2/2:
  • Place the battery and lock it into place

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

kempc8

Member since: 11/22/2013

823 Reputation

7 Guides authored

Team

K and K Fixit Member of K and K Fixit

Business

1 Member

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 173