Introduction

Before removing the RAM you will need to remove your battery.

Push in the tab on the battery and lift up. The battery should detach very easily. Push in the tab on the battery and lift up. The battery should detach very easily. Push in the tab on the battery and lift up. The battery should detach very easily.
  • Push in the tab on the battery and lift up. The battery should detach very easily.

Add Comment

Remove the single screw securing the RAM compartment and pull up to reveal the RAM. Remove the single screw securing the RAM compartment and pull up to reveal the RAM. Remove the single screw securing the RAM compartment and pull up to reveal the RAM.
  • Remove the single screw securing the RAM compartment and pull up to reveal the RAM.

Add Comment

Push on the small white metal tabs on both sides of a module to unlock it. The RAM should be stick out at approximately a 45 degree angle. Grasp the RAM by the sides and pull straight out to remove it. If the RAM sticks slightly, wiggle it back and forth gently to loosen it.
  • Push on the small white metal tabs on both sides of a module to unlock it.

  • The RAM should be stick out at approximately a 45 degree angle. Grasp the RAM by the sides and pull straight out to remove it.

    • If the RAM sticks slightly, wiggle it back and forth gently to loosen it.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Taylor Woods

Member since: 04/05/2011

101 Reputation

2 Guides authored

Team

Cal Poly, Team 10-40, Forte Spring 2011 Member of Cal Poly, Team 10-40, Forte Spring 2011

CPSU-FORTE-S11S10G40

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 3,498