Introduction

Accessing the RAM in this laptop is fairly simple and requires little disassembly.

Parts

No parts required.

To prevent injury, make sure the laptop is unplugged before removing the battery.
  • To prevent injury, make sure the laptop is unplugged before removing the battery.

  • Flip the laptop over, bottom-side up.

Add Comment

Push the switch next to the battery.
  • Push the switch next to the battery.

  • At the same time, lift the battery away from the laptop.

Add Comment

Unscrew two 4 mm Philips #00 screws.
  • Unscrew two 4 mm Philips #00 screws.

  • Remove the RAM door panel.

Add Comment

Pull the tabs located at red circles apart in order to separate the ram from its housing.
  • Pull the tabs located at red circles apart in order to separate the ram from its housing.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kenneth Odum

Member since: 09/23/2014

475 Reputation

4 Guides authored

Team

USF Tampa, Team 11-1, Blackwell Fall 2014 Member of USF Tampa, Team 11-1, Blackwell Fall 2014

USFT-BLACKWELL-F14S11G1

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 12

All Time: 723