Introduction

How to remove and replace the hard-drive

    • Lift the latch and disconnect the hard-drive cable from the system board.

    Add Comment

    • Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

    Add Comment

    • Lift the hard-drive assembly from the palm rest and keyboard assembly.

    Add Comment

    • Remove the screws that secure the hard-drive bracket to the hard drive.

    Add Comment

    • Lift the hard drive from the hard-drive bracket.

    Add Comment

    • Disconnect the interposer from the hard drive.

    Add Comment

    • Connect the interposer to the hard drive.

    Add Comment

    • Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

    Add Comment

    • Replace the screws that secure the hard-drive bracket to the hard drive.

    Add Comment

    • Place the hard-drive assembly on the palm rest and keyboard assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly

    Add Comment

    • Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

    Add Comment

    • Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

darrius

Member since: 03/26/2018

4,727 Reputation

30 Guides authored

Team

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

15 Members

925 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 20

All Time: 20