Introduction
This guide provides the steps needed to put the Power Circuit into the correct state and allowing laptop to power on.
What you need
-
-
(9) 0.7mm Screws holding back cover in place
-
Small plastic tabs holding cover in place.
-
-
-
-
(3) 0.4mm screws holding battery in place
-
Once screws are removed battery can be safely removed.
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
