Introduction

Use this guide to replace a broken monitor stand.

Parts

No parts required.

Image 1/1: Remove the four 11.9 mm Phillips #2 screws securing the stand to the back of the monitor.
  • Lay the monitor screen-down so the back screws are exposed.

  • Remove the four 11.9 mm Phillips #2 screws securing the stand to the back of the monitor.

Add Comment

Image 1/1:
  • Gently lift and pull away the stand at a slight angle away from the monitor.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Mackenzie Keane

Member since: 10/04/2011

457 Reputation

5 Guides authored

Team

Cal Poly, Team 5-36, Amido Fall 2011 Member of Cal Poly, Team 5-36, Amido Fall 2011

CPSU-AMIDO-F11S5G36

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 18

All Time: 2,431