Fix Your Stuff Community Store

DeWalt DWE4011 Power Switch Replacement

Introduction

The power switch is for turning the device on and off. It can have trouble and not work if the button in the switch box wears out. This is a guide on how to repair the power switch

What you need

  1. DeWalt DWE4011 Power Switch Replacement, Power Switch: step 1, image 1 of 1

    • Turn to the bottom of the device and remove the 1 1/4" screw shown using a T15 Torx Screwdriver.

    Edit

  2. DeWalt DWE4011 Power Switch Replacement: step 2, image 1 of 1

    • Remove the outer casing by pulling the end handle away from the field case.

    Edit

  4. DeWalt DWE4011 Power Switch Replacement: step 3, image 1 of 1

    • Unscrew the pin that is holding the main power cord in place and remove the cord.

    Edit

  5. DeWalt DWE4011 Power Switch Replacement: step 4, image 1 of 2 DeWalt DWE4011 Power Switch Replacement: step 4, image 2 of 2

    • Pull back the tab holding the switch box in place using a nylon spudger. There is one on top and bottom shown in the image.

    Edit

  6. DeWalt DWE4011 Power Switch Replacement: step 5, image 1 of 1

    • Remove the switch box entirely from its normal position. Gently pull off the connections from the switch box to the motor.

    Edit

  7. DeWalt DWE4011 Power Switch Replacement: step 6, image 1 of 2 DeWalt DWE4011 Power Switch Replacement: step 6, image 2 of 2

    • Using a small Phillips head screwdriver, remove the screws that hold the white colored wires from the power cord in place.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 32

All Time: 1,126