Introduction
The armature allows electrical current to go through the device and provide power to the grinding wheel. Without the armature, there would be no torque or power to spin the grinder. This guide will show how to replace it.
What you need
-
-
Remove the four T15 Torx screws from the front of the grinder and remove the face plate from the body.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Oregon Institute of Technology, Team S2-G9, Lancaster Spring 2019 Member of Oregon Institute of Technology, Team S2-G9, Lancaster Spring 2019
OIT-LANCASTER-S19S2G9
4 Members
5 Guides authored
