Introduction

This guide will show you how to take off the plastic cover on the saw, so you can get to the inside components.

Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.
  • Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.

Add Comment

Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.
  • Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove Allen Key.
  • Remove Allen Key.

Add Comment

Unscrew the black plastic knob underneath the trigger.
  • Unscrew the black plastic knob underneath the trigger.

Add Comment

Grab hold of the black air filter portion and pull off.
  • Grab hold of the black air filter portion and pull off.

Add Comment

This is what the inside of the saw looks like.
  • This is what the inside of the saw looks like.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Scott Weinhardt

Member since: 01/25/2017

501 Reputation

5 Guides authored

Team

Cal Poly, Team 8-2, Banghart Winter 2017 Member of Cal Poly, Team 8-2, Banghart Winter 2017

CPSU-BANGHART-W17S8G2

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 81