Introduction

Make sure the drill is "off" by putting the forward reverse switch in the middle position. Make sure your hands are dry when handling the drill and charger.

Grab drill in one hand and cup the battery (located at the bottom of the drill) with the other hand .
  • Grab drill in one hand and cup the battery (located at the bottom of the drill) with the other hand .

Add Comment

Use other hand to push down on the yellow button located on the battery
  • Use other hand to push down on the yellow button located on the battery

Add Comment

Pull the battery in a horizontal direction away from the drill. Pull the battery in a horizontal direction away from the drill.
  • Pull the battery in a horizontal direction away from the drill.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Emily Passey

Member since: 04/12/2016

240 Reputation

2 Guides authored

Team

Cal Poly, Team 25-5, Maness Spring 2016 Member of Cal Poly, Team 25-5, Maness Spring 2016

CPSU-MANESS-S16S25G5

4 Members

2 Guides authored

One Comment

This was less than useful.

Mike Hayes - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 8

All Time: 178