Introduction

If you need to replace a part within the drill, then you need to remove the outer shell of the drill. By following this guide you will know how to take apart the drill assembly to get inside of it.

Parts

No parts required.

Image 1/1:
  • Compress the buttons on either side of the battery and lift the drill away from battery.

Add Comment

Image 1/1:
  • Remove battery from drill.

Add Comment

Image 1/2: Image 2/2:
  • Remove the eight 16 mm, Torx Security #15 screws.

Add Comment

Image 1/1:
  • Lay the drill on its side and gently lift the top half off it.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jonathan Hamel

Member since: 03/10/2016

413 Reputation

4 Guides authored

Team

One Comment

It's actually a torx #10 and obviously, you dont really need a torque wrench, I got mine apart with my pro kit with no problems.

Christopher Porter - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 10

All Time: 221