Introduction

If you are having trouble controlling the speed of the drill there may be a problem with your clutch. By following this guide you will learn how to replace it.

Parts

No parts required.

Image 1/1:
  • Compress the buttons on either side of the battery and lift the drill away from battery.

Add Comment

Image 1/1:
  • Remove battery from drill.

Add Comment

Image 1/2: Image 2/2:
  • Remove the eight 16 mm, Torx Security #15 screws.

Add Comment

Image 1/1:
  • Lay the drill on its side and gently lift the top half off it.

Add Comment

Image 1/1:
  • Lift drill mechanism from the drill assembly.

Add Comment

Image 1/2: Remove clutch. Image 2/2: Remove clutch.
  • Twist slightly and pull clutch away from motor.

    • Remove clutch.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jonathan Hamel

Member since: 03/10/2016

413 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 22

Past 30 Days: 102

All Time: 868