DROCON Ninja Propeller Replacement

Introduction

This guide is a replacement guide for the propellers on the DROCON Ninja DC-014 drone. The propellers are the part of the device that spins, which allows the drone to fly. If the blades are chipped or bent they may need to be replaced. To determine if the propeller needs replacement check out the troubleshooting guide linked here. You will not need any tools for this guide and there are no difficult steps required.

Step 1 Battery

DROCON Ninja Propeller Replacement, Battery: step 1, image 1 of 3

DROCON Ninja Propeller Replacement, Battery: step 1, image 2 of 3

DROCON Ninja Propeller Replacement, Battery: step 1, image 3 of 3

Make sure the drone is powered off before beginning the battery replacement.
To turn the drone off, press and hold the black button on the top of the drone until all lights are off.
Firmly grasp the battery tab between your thumb and index finger.
Pull the battery away from the drone's body

Edit

Step 2 Propeller

DROCON Ninja Propeller Replacement, Propeller: step 2, image 1 of 2

DROCON Ninja Propeller Replacement, Propeller: step 2, image 2 of 2

Firmly grasp the blade guard from the bottom of the drone
Pull the blade guard straight down away from motor.

Edit

Step 3

DROCON Ninja Propeller Replacement: step 3, image 3 of 3

Take note of the letter printed on the bottom of the propeller. Make sure the replacement propeller has the same letter.
Grasp the center of the propeller that needs to be replaced.
Pull the propeller directly up and away from the motor.