DOSS SoundBox Speaker Replacement

Step 1 Speaker Removal



• Use the JIS #00 screwdriver to remove the 3/32" screws that secure the speaker to the body.
• Remove the smaller 3/32" screws that secure the left side of the speaker with a JIS #1 screwdriver.
• The smaller screws are still the same length, but they have smaller screw heads. You can use the same screwdriver for both.
• Using a Magnetic Mat throughout this process will help prevent losing screws.
Step 2



• Use the Plastic Opening Tool to gently lift the speaker enough to see the connected wires.
Step 3
• Use a soldering iron to de-solder the two speaker wires from the speaker itself.
• The speakers are ready to be removed and replaced.
• Ensure that the device is turned off when handling bare wire.
• Soldering iron is very hot.

Author

with 8 other contributors

Brendan Harkreader

Member since: 09/27/18

502 Reputation

3 Guides authored

Badges: 9

• 
• 
• 

+6 more badges

Team

Linn Benton Community College, Team S1-G3, Johnson Fall 2018 Member of Linn Benton Community College, Team S1-G3, Johnson Fall 2018

LBCC-JOHNSON-F18S1G3

4 Members

5 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview