Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

DJI Mini 3 Pro Disassembly

Views: 24K

View statistics:

Past 24 Hours:
12
Past 7 Days:
108
Past 30 Days:
424
All Time:
23,646
Comments: 1

1 guide comment.

Go to guide comments
Completed: 7

7 people have marked this guide "completed." Will you be next?

Favorites: 2

2 people have favorited (and subscribed to) this guide. Will you be next?

Time Required: 2 - 3 hours
Difficulty: Difficult
Community-Contributed Guide

An awesome member of our community made this guide. It was not created by iFixit staff.

Needs Transcription

This guide is in video form only. Help make it more accessible by transcribing each action of the procedure into a separate step and adding photos.

DJI Mini 3 Pro Disassembly

Introduction

Hi everyone, In this guide, I'll show you how to disassemble to replace the main parts of the DJI Mini 3 Pro drone.

Additional Information

After replacing the drone's GPS module, you will need to calibrate the drone in the DJI Fly mobile app.

To replace the ESC board and drone arms, you will need a soldering iron.

After replacing the motherboard, you will need to calibrate the gimbal camera.

Use this manual to calibrate the gimbal camera https://youtu.be/mu03HWXplM4

What you need

Tools

Video Instructions

Conclusion

To reassemble your device, follow these instructions.

Cancel: I did not complete this guide.

7 other people completed this guide.

Author

with

Arty

Member since: 10/27/19

34,654 Reputation

110 Guides authored

1 Guide Comment

Wie kann ich die Heißklebestellen "materialschonend" lösen? Ich trau mich da nicht mit dem Heißluftgeläse ran.

Woifi - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 12

Past 7 Days: 108

Past 30 Days: 424

All Time: 23,646