What you need
-
-
Remove power cord, network cable, etc.
-
Remove paper tray and rear paper guide.
-
-
-
Slide the cover of the expansion slot backwards and open.
-
Unhook the flap from the lower hinge.
-
-
-
-
Loosen and remove front screws (1x top, 1x bottom) and rear (1x top, 1x bottom) with Phillips screwdriver.
-
-
-
Carefully loosen the front and rear housing parts with a light pull from the left.
-
Remove the left housing by carefully loosening the 3 clamps on the floor.
-
Follow the steps in reverse order to reassemble your device.
Follow the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›