Introduction

This guide will show how to install the top casing on the CygoLite night rover. It will start from the torn-down position and show the proper installation of the top casing.

Start with the device torn down to just the base, with the internals of the device showing. Place the top casing onto base. Ensure that the rubber gasket is positioned properly between the top and bottom casings
  • Start with the device torn down to just the base, with the internals of the device showing.

  • Place the top casing onto base.

  • Ensure that the rubber gasket is positioned properly between the top and bottom casings

  • Flip the device with the bottom facing upwards.

  • Reinsert and screw in the screws to the bottom casing.

Add Comment

Deck the Halls
With tools and Fix Kits
Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan

Member since: 10/22/2012

101 Reputation

1 Guide authored

Team

Clemson, Team 14-3, Benson Fall 2012 Member of Clemson, Team 14-3, Benson Fall 2012

CLEM-BENSON-F12S14G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 156