Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Cuisinart TOA-60FR Outside Removal

Introduction

This guide will walk you through the process of reaching the inside of a Cuisinart toaster oven. The oven's components are contained within this inner layer, and reaching them requires removal of the entire outer layer.

What you need

  1. Cuisinart TOA-60FR Outside Removal, Outside removal: step 1, image 1 of 1

    • Using a 25-hexagon head screwdriver, unscrew these three 7.31 mm screws.

    Edit

  2. Cuisinart TOA-60FR Outside Removal: step 2, image 1 of 2 Cuisinart TOA-60FR Outside Removal: step 2, image 2 of 2

    • Using a Phillips #1 screwdriver, remove all of these 7.31 mm screws.

    • Pull off the back panel.

    Edit

  4. Cuisinart TOA-60FR Outside Removal: step 3, image 1 of 3 Cuisinart TOA-60FR Outside Removal: step 3, image 2 of 3 Cuisinart TOA-60FR Outside Removal: step 3, image 3 of 3

    • Flip the oven upside down.

    • Use a spudger to pull out the grey stoppers.

    • Use a Phillips #1 screwdriver to remove all three 11 mm screws.

    Edit

  5. Cuisinart TOA-60FR Outside Removal: step 4, image 1 of 2 Cuisinart TOA-60FR Outside Removal: step 4, image 2 of 2

    • Unscrew all of the 11.05 mm screws that connect the outer shell to the interior device.

    Edit

  6. Cuisinart TOA-60FR Outside Removal: step 5, image 1 of 3 Cuisinart TOA-60FR Outside Removal: step 5, image 2 of 3 Cuisinart TOA-60FR Outside Removal: step 5, image 3 of 3

    • Push down with a screw driver between the tabs, then pull up to release the tabs. Pull the top piece off.

    Edit
Conclusion

To put the device back together, follow these steps in reverse order.

2 other people completed this guide.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 22

Past 30 Days: 83

All Time: 1,681