Remove the four screws from the bottom of the processor with a Philips Screwdriver.
  • Remove the four screws from the bottom of the processor with a Philips Screwdriver.

Add Comment

Remove the bottom casing of the processor.
  • Remove the bottom casing of the processor.

Add Comment

If any wires are frayed, cut them off where they are connected by wire nuts.
  • If any wires are frayed, cut them off where they are connected by wire nuts.

Add Comment

Detach the wire nut from the other connected wires.
  • Detach the wire nut from the other connected wires.

Add Comment

Replace the bad wire with a new one of the same gauge.
  • Replace the bad wire with a new one of the same gauge.

Add Comment

Strip the new wire to the same length as the other wires and connect them to a wire nut.
  • Strip the new wire to the same length as the other wires and connect them to a wire nut.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Riley Carns

Member since: 04/02/2015

258 Reputation

2 Guides authored

Team

Cal Poly, Team 24-1, Lancaster Winter 2015 Member of Cal Poly, Team 24-1, Lancaster Winter 2015

CPSU-LANCASTER-W15S24G1

1 Member

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 13

All Time: 222