Fix Your Stuff Community Store

Cuisinart DFP-14BCN Back Casing Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Cuisinart DFP-14BCN Back Casing Replacement, Bowl: step 1, image 1 of 3 Cuisinart DFP-14BCN Back Casing Replacement, Bowl: step 1, image 2 of 3 Cuisinart DFP-14BCN Back Casing Replacement, Bowl: step 1, image 3 of 3

    • Unplug your food processor before starting any disassembly.

    • Remove the small pusher by rotating it clockwise and lifting up.

    Edit

  2. Cuisinart DFP-14BCN Back Casing Replacement: step 2, image 1 of 1

    • Remove the large pusher by grabbing its sides and pulling up.

    • There may be a clicking sound from the safety feature being disengaged in this step.

    Edit

  3. Cuisinart DFP-14BCN Back Casing Replacement: step 3, image 1 of 3 Cuisinart DFP-14BCN Back Casing Replacement: step 3, image 2 of 3 Cuisinart DFP-14BCN Back Casing Replacement: step 3, image 3 of 3

    • Remove the lid from the bowl by turning it clockwise and lifting.

    Edit

  5. Cuisinart DFP-14BCN Back Casing Replacement: step 4, image 1 of 1

    • Take out the blades by grabbing the plastic center piece and lifting up.

    • Avoid contact with blades as they are extremely sharp.

    Edit

  6. Cuisinart DFP-14BCN Back Casing Replacement: step 5, image 1 of 3 Cuisinart DFP-14BCN Back Casing Replacement: step 5, image 2 of 3 Cuisinart DFP-14BCN Back Casing Replacement: step 5, image 3 of 3

    • Position the handle of the bowl so that it is on your left.

    • Grab the handle and push clockwise. Lift up the bowl to remove it.

    Edit

  7. Cuisinart DFP-14BCN Back Casing Replacement, Back Casing: step 6, image 1 of 2 Cuisinart DFP-14BCN Back Casing Replacement, Back Casing: step 6, image 2 of 2

    • Turn the food processor's base upside down by lifting it up and turning it over.

    • Position the base so that the on and pulse buttons are facing you.

    • Place the base on top of the food processor's bowl to keep the base from wobbling while you work on it.

    Edit

  8. Cuisinart DFP-14BCN Back Casing Replacement: step 7, image 1 of 2 Cuisinart DFP-14BCN Back Casing Replacement: step 7, image 2 of 2

    • Remove the two 13.0mm screws that hold down the casing with a Phillips #2 screwdriver.

    Edit

  9. Cuisinart DFP-14BCN Back Casing Replacement: step 8, image 1 of 3 Cuisinart DFP-14BCN Back Casing Replacement: step 8, image 2 of 3 Cuisinart DFP-14BCN Back Casing Replacement: step 8, image 3 of 3

    • Lift up the front left and the back right rubber feet by pulling back the rubber with your fingers.

    • Remove the 13.0mm screw under each rubber foot with a Phillips #2 screwdriver.

    Edit

  10. Cuisinart DFP-14BCN Back Casing Replacement: step 9, image 1 of 2 Cuisinart DFP-14BCN Back Casing Replacement: step 9, image 2 of 2

    • Lift off the back casing by raising it upward.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Sonya Dick

Member since: 10/05/16

352 Reputation

3 Guides authored

Badges: 13

+10 more badges

Team

Cal Poly, Team 10-3, Livingston Fall 2016 Member of Cal Poly, Team 10-3, Livingston Fall 2016

CPSU-LIVINGSTON-F16S10G3

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 59