Parts

No parts required.

Introduction

This guide will show you how to remove the front cover of your device. Use this guide to gain access to the button pad and LCD screen.

Image 1/1:
  • Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.

Add Comment

Image 1/1:
  • Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.

Add Comment

Image 1/3: When the cover has been lifted off the screen, use your hands to remove it from the device. Image 2/3: The button pad may fall off when the cover is removed. Image 3/3: The button pad may fall off when the cover is removed.
  • Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen.

  • When the cover has been lifted off the screen, use your hands to remove it from the device.

  • The button pad may fall off when the cover is removed.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gabriele Pregadio

Member since: 04/17/2013

1 Reputation

2 Guides authored

Team

Cal Poly, Team 17-2, Regan Spring 2013 Member of Cal Poly, Team 17-2, Regan Spring 2013

CPSU-REGAN-S13S17G2

4 Members

8 Guides authored

One Comment

Fantastic but does anyone know where I can get this part?

VegetaFlex4Fitness - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 226