Parts

No parts required.

Introduction

Instructions how to remove the control pad cover panel on the Creative Zen V Plus.

Image 1/1: Using the ifixit opening tool, place the skinny flat side of tool inside groove and with a twisting motion, pry the mating surfaces apart.
  • Locate the groove along side the device where the control panel cover plate are seated.

  • Using the ifixit opening tool, place the skinny flat side of tool inside groove and with a twisting motion, pry the mating surfaces apart.

  • Once to two surface have detached, gently pull the two surfaces apart with your fingers.

Add Comment

Conclusion

Place the panel on top in it's original position and firmly press back into place .

Brock Schaffer

Member since: 10/26/2016

331 Reputation

3 Guides authored

Team

IUPUI, Team 2-5, Baechle Fall 2016 Member of IUPUI, Team 2-5, Baechle Fall 2016

IUPUI-BAECHLE-F16S2G5

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 33