Introduction

Hello! This guide will show you the steps to remove the front and back cover to your Creative Nomad Jukebox Zen Device.

Parts

No parts required.

Use a J0 screwdriver to remove the eight 3.5mm screws. Use a J0 screwdriver to remove the eight 3.5mm screws. Use a J0 screwdriver to remove the eight 3.5mm screws.
  • Use a J0 screwdriver to remove the eight 3.5mm screws.

Add Comment

Use the plastic opening tool to open the top cover by carefully prying at each corner. Use the plastic opening tool to open the top cover by carefully prying at each corner. Use the plastic opening tool to open the top cover by carefully prying at each corner.
  • Use the plastic opening tool to open the top cover by carefully prying at each corner.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Eli Richter

Member since: 03/08/2017

301 Reputation

3 Guides authored

Team

IUPUI, Team S4-G5, Baechle Spring 2017 Member of IUPUI, Team S4-G5, Baechle Spring 2017

IUPUI-BAECHLE-S17S4G5

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 24