Fix Your Stuff Community Store

Crain Jamb Saw 775 2014 Blade Replacement

Introduction

This guide will demonstrate how to replace the blade in your Crain 775 Jamb Saw.

What you need

  1. Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: step 1, image 1 of 3 Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: step 1, image 2 of 3 Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: step 1, image 3 of 3

    • Unplug the power cord before you begin.

    • The saw blade is sharp, in order to prevent injury, you may want to wear protective gloves when handling it.

    • Depress the spindle lock button to prevent the blade from spinning when you unfasten it.

    • While depressing the spindle lock, use a 3/16 hex key to remove the socket set screw securing the blade in place.

    Edit

  3. Crain Jamb Saw 775 2014 Blade Replacement, Remove the blade: step 2, image 1 of 2 Crain Jamb Saw 775 2014 Blade Replacement, Remove the blade: step 2, image 2 of 2

    • Remove the blade.

    • When replacing with a new blade, ensure the two pegs on the face of the rotor mate with the holes in the blade.

    • Tighten the new blade with the socket set screw firmly before use. Ensure the spindle lock is pulled before turning the saw on.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Tarun Thiruma

Member since: 11/20/19

35,673 Reputation

134 Guides authored

Badges: 32

+29 more badges

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 337