Cowin E7 Ear Cushion Replacement

Introduction

This guide will show you how to easily replace loose or damaged ear cushions on the Cowin E7 headphones. When the cushions are loose or damaged, they will cause problems with sound quality and the noise canceling function.

What you need

Step 1 Ear Cushion

Cowin E7 Ear Cushion Replacement, Ear Cushion: step 1, image 1 of 1

Inspect the seal around the edge of each ear cushion for damage or instability.
Make note of which ear cushion needs to be replaced.

Edit

Step 2

Firmly grasp the ear cushion on one side and pull up.
The ear cushion is only attached by a few spots of glue, so it should not take much force to remove.

Edit

Step 3

Spread multipurpose glue around the edge of the seal.
Keep in mind that the more glue you use, the harder it will be to remove the ear cushions again.
Place the replacement ear cushions where the damaged cushions were.
Hold for at least thirty seconds to ensure the glue has time to dry and seal the new cushions to the headphones.